FAQs

About Us

How Does Your Riding Surface Calculator Work?

We’ve tried to make the Riding Surface Calculator as simple as possible.

You will need to know what width and length your arena is, a typical arena is 20m x 40m.

Thirdly, you will have to enter which application you require “Topper” or Standalone”.

Lastly, you will need to enter your delivery postcode. The Riding Surface Calculator will display the total without VAT/ total including VAT/ grand total including VAT and delivery.

How Do I Use "Order Now" When Purchasing A Riding Surface?

Once you have entered in all of the required details using the Riding Surface Calculator you will then need to enter the following into the “Order Now” section:

Select your riding surface type
Enter in the quantity of bags shown in the “Bags of Surface Required – Maximum 20 Bags Per Load”
Enter in your preferred delivery date
Enter your billing and delivery details
Copy the amount shown in “Grand Total Including VAT and Delivery” into field that requires the price.
Accept terms and conditions
Enter card details and pay

How Much Will Delivery Cost?

You can find out delivery cost by using our Riding Surface Calculator.

Do You Send Out Samples Of Your Surfaces?

Yes, please contact us requesting a sample and provide your postal address.

How Long Will It Take To Deliver My New Surface?

You may inform us of a preferred delivery date and we will endeavour to deliver your surface when requested. We provide all delivery drivers with your telephone number and request that they call you before delivery, so as to give you time to prepare.

What Vehicle Will Deliver My Riding Surface?

Delivery vehicle will be via a 44 tonne tautliner.

Questions About Our Riding Surfaces

What Vehicle Will Deliver My Riding Surface?

A topper riding surface is whereby you add a top layer of surface to a preexisting surface. This is most commonly added to sand surfaces, which many find rides too deep or holds water and a topper riding surface helps to reduce or eliminate these problems.

What Is A Standalone Riding Surface?

A standalone riding surface is when a surface is applied directly to the membrane without a preexisting surface being in place. This is usually a more cost effective option and provides a better riding experience.

Do Your Surfaces Freeze?

All of our riding surfaces contain synthetic fibres meaning that they do not freeze (up to -5). However, what does freeze is the water surrounding them. This is true for whatever surface is used. Our riding surfaces help reduce and inhibit the surface from freezing.

Do I Mix In Your Surfaces Or Lay Them On Top?

It’s completely up to, our surfaces work great however laid. It’s up to you how you and what the desired ride you require of your surface.

How Do I Lay Your Surfaces?

Please view of installation guide.

What Maintenance Do Your Surfaces Need?

Please view of maintenance guide.

Can I Add Your Surfaces To A Sand Arena?

Yes!

What Depth Is A Topper Riding Surface?

Light Topper – A light topper riding surface is estimated at approximately 25/50mm or 1/2 inches
Regular Topper – A regular topper riding surface is estimated at approximately 50/76mm or 2/3 inches

What Depth Is A Standalone Riding Surface?

Regular Standalone – A standalone riding surface estimated at approximately 100mm/ 150mm or 4/6 inches
Deep Standalone – A heavy standalone riding surface estimated at approximately 150/205mm or 6/ 8 inches

We Have A Rubber Surface, Can I Mix In Your Surfaces?

Riding Chip has a similar aesthetic to rubber so would be ideal to top up or lay over an existing rubber surface. Our surfaces aid in providing better traction for the horse and help prevent surface loss from the flicking effect created by the horse’s hooves.

FAQs

About Us

Questions About Our Riding Surfaces

Quick Links

Important Links

Contact Details